• Responding calculating the steel structure and RC structural partially
• Drawing proposal drawings and approval drawings
• Acknowledge the BOQ and BOM (Bill of Materials) of steel structure
• Responding the at site with project
• Responding the structural technical to client
• Innovating the solution for steel structure progress
• Responding the project at site with erection drawings
• Consulting the Steel structures with Reinforcement Concrete

• To analyze customer requirement through project information from sale team.
• To design steel building structures by using specializing analysis software and occasionally by manual.
• To provide technical documentation including CAD drawing (proposal and approval), cost data, design calcula-tions, bills of materials, technical specifications, test data etc.
• To support other departments where required on issues of a technical nature.
• To provide technical support for customers, which may involve site visits.
• To assist design manager as required.
• Optimizes the design by utilizing optimizing techniques in order to achieve the most economical and an ade-quate design.
• Plans to finish the work according to the schedules and deadlines assigned. Gives early warning to the super-visor if the schedules cannot be met.
• Participates in design meeting and suggests improvement of design engineering practices.
• Checks other design engineer’s work if checking assigned to him.
• To review shop drawing/ erection drawing / material planning and submission to customer.
• To be at field for site inspect during construction and make improvement.

• Assist sale in preparing documents and cross check with site.
• Support sale in documents for internal team
• Coordinate work between site and office
• Help book materials after winning project
• Cross check with site to support sale work
• Daily report about project status to sale

• Coordinate work progress with Main Contractor/ Consultant/ Customer
• Take instructions from customer
• Monitor materials delivered to site (follow up with Logistics Department)
• Check and verify delivered materials with Delivery Note and Master List
• Store the materials properly at work site
• Do Acceptance Delivery with sub-contractor & client when completing material delivery
• Control and coordinate work site everyday
• Supervise sub-contractor
• Ensure the erection of PEB follows FUXIN’s guideline and safety guideline
• Review and monitor work progress against program and schedule and take appropriate actions
• Arrange meetings and take minutes of all necessary meetings at site
• Conduct Tool Box meeting every morning
• Record and report to Site Manager regarding any accidents at site
• Control and monitor safety activities as safety officer
• Make reports requested by Site Manager
• Report to Site Manager regarding change orders instructed by customer
• Conduct, prepare and submit all necessary inspection reports to customer at each stage of the work.

• Control and inspect work quality on site
• Check and ensure that works are being carried out as per
design drawing and specification
• Be able to install and lead installation team

- Plan and design power station and requirement for generator and air-conditioners.
- Supervise construction plan and specification and draw up contract.
- Supervise operating and maintenance staffs.
- Design and produce drawing of electrical and air-conditioning system using Computer-Assisted Design (CAD)
- Decide on the type and arrangement of circuit, transformers, circuit-breakers, transmission lines and equipment, based on calculations
- Make or improve products such as electric motors parts, equipment and appliances.
- Prepare and interpret specifications, drawings and regulations for the use of electric and air-conditioners power equipment.
- Work out delivery and installation schedules for machines, switchgear, cables and fittings.
- Organize and manage staffs and material in the making of machines appliance and equipment.
- Make sure that complete works meet specification and safety standard.
- Design and install control and signaling device for road, rail and air traffic.
- Design telecommunications equipment and networks.
- Contribute and adhere to safety requirements.
-Transport networks, including rail electrification and signaling.
- Power generation, transmission and distribution.
- Renewable energy sources, such as solar paneling, hydroelectric and wind turbines.
- Manufacturing and construction.
- Building services, such as lighting, heating, ventilation and lift systems.
- Coordinating the work of technicians and craftspeople.
- Testing installations and systems, and analyzing test data.
- Making sure projects meet safety regulations.
- Overseeing inspection and maintenance programs.
- Attending meetings, writing reports and giving presentations.

- Supervise the daily operations of Security,
Housekeeping and Fire Safety
- Manage the Fire Command Centre
- Attend and manage any emergencies on site, for
example, fire alarms, bomb threats, etc.
- Provide input in the preparation of annual budgets
- Attend to tenants’ request/complaints
- Conduct performance appraisals in accordance with the
Company policy
- Carry out and assume any other duties and
responsivities as and when assigned by Assistant
Property Manager
- Carry out routine check on building services including
cleanliness of toilets, walkway, lighting, flooring,
corridor carpet, car lifts, lobby etc.
- Develop checklist and report template for patrolling
around premise both retail and office floor
- Assign zoning for Building Attendant to inspect in the
premise of building
- Inspect the outsource security guard on grooming,
location/post, attendant, tools/equipment for daily
operation
- Join briefing session/morning/afternoon/night for
security or cleaning.
- Controlling fitting out contractor
- Oversee the performance/discipline loading/unloading
bay
- Oversee parking area both basement and external space
- Handling on some admin task assigned by Assistant
Property Manager
- Collecting daily report from Operation and submit to
Assistant Property Manager

Job Requirement:
o Bachelor Degree in Civil Engineering
o Fresh graduated student who has 2 years of building experience
o Able to use Ms. Office, Ms. Project, AutoCAD
o Good command in English both spoken and written
o Sex: Open
o Age: Open

Project name: Water purification plant. This project just starts in June and it will finish in the next 3 years.
• To do soil testing and soil backfill
• To do labor test of wind and water pressure in the pipe
• To do excavation
• To do earth work and structure work like barricade, etc.
• To manage machinery
• To assistant Japanese manager to coordinate with sub-constructor or foreman

• Responsible to lead the automation inclusive maintenance ( internal or external), upgrades hardware or software on services and license
• Responsible for work order(WO) scoping, prioritization, quality of work order detail, issuing of work orders, and the effective follow up and closing out of work orders.
• Plan, control, and monitor plant control & instrumentation maintenance activities through work order system.
• Ensure that the instruments comply with health and safety regulations.
• Participant in plant safety, health and environmental, TPM programs.
• Reporting Near miss and unsafe condition.
• Implement procedure, SOP & WI.
• To understand and apply LOTO for during work.
• Ensure production equipment are in the good condition to run smooth process and production.
• Provide and conduct daily & weekly performance evaluation and provide plan for improvement by RCA or advanced problem solving.
• Continuous improvement on technical availability through TPM analyses the breakdown in daily basic.
• Install, maintain, repair, overhaul, calibration and test a Brewery equipment & instrumentation.
• Troubleshoot all machines and process controller hardware, maintain a functional knowledge if the operation of the system software and hardware.
• Make periodic preventative maintenance inspections of all machine and control systems. Diagnosing existing or potential trouble.
• Read and interpret wiring diagrams, drawings, and specifications in making installations or performing major repair work.
• To work with Area responsible for troubleshooting any automation related breakdown.
• To work with team for achieve maintenance KPI.