Under the direction of Group Leader, MEP Engineer will be responsible for providing MEP drawing, coordination, construction technical support for all projects assigned. The incumbent will also ensure the smooth of coordination MEP concern with other internal departments including BU and Project as required supporting the MEP infrastructure needs.
• Develop detailed design specifications and assists for MEP engineering services and similar to contracts to support Department needs;
• Develop detail MEP engineering related scope of work for all capital projects;
• Review and comment on all MEP engineering related work performed by engineering consultants;
• Conduct site inspections to ensure adherence to engineering standards and specifications;
• Support construction contractor and provide MEP engineering related support, review and coordination to ensure that the quality expectation are properly met during construction;
• Review material specifications to ensure they adhere to the standards;
• Develop highly complex engineering studies, plans, specifications, calculations, evaluations, design documents, and performance assessments as required;
• Recommend alternative engineering solutions to management to meet the requirement;
• Design, develop, modify and evaluate systems, processes, or facilities to support the capital improvement projects objectives;
• Review all project MEP field reports on a monthly basis;
• Coordinate with office staff, consultants, contractors and other personnel; and
• Any additional tasks identified by your supervisor.

Negotiable
Level Middle Term Full Time
Year of Exp. 5 Function Architecture/Engineering
Hiring 1 Industry Architecture/Building/Construction
Salary Negotiable Qualification Bachelor Degree
Sex Male/Female Language English-- Good
Age 25 ~ 35 Location Phnom Penh
Job Description
The role of Structural Design Engineer is to ensure the structure design withstand stresses and pressure imposed through environmental and human use without any deflect, rotate, vibrate excessively or collapse. The individual must also prepare reports and work with architects, urban planners and other professionals.

• Preparing reports, designs and drawings
• Obtaining planning and/or building regulations approval
• Inspecting properties to check conditions/foundations
• Involve in the investigation and survey of build sites to determine the suitability of the earth for the requirements of the upcoming project.
• Examine structures at risk of collapse and advising how to improve their structural integrity, such as recommending removal or repair of defective parts or rebuilding the entire structure;
• Co-ordinate and consult with other members of the projects, including engineers, environmental scientists, architects and landscape architects.
• Organize and deliver materials and equipment for the needs of the construction project.
• Analyse configurations of the basic structural components of a building or other structure;
• Calculate the pressures, stresses and strains that each component, such as a beam or lintel, will experience from other parts of the structure due to human use or environmental pressures such as weather or earthquakes;
• Consider the strength of various materials, e.g. timber, concrete, steel and brick, to see how their inclusion may necessitate a change of structural design;
• Make drawings, specifications and computer models of structures for building contractors;
• Liaise with construction contractors to ensure that newly erected buildings are structurally sound;
• Liaise with other designers, including architects, to agree on safe designs and their fit with the aesthetic concept of the construction;
• Liaise with government authorities in their own inspections relating to the project.
• apply expert knowledge of the forces that act on various structures.

• Prepare HVAC design and CAD drawings in accordance to design standards.
• Coordinate with Civil Structural, Architectural and Electrical Designers for the preparation of combined drawings and clash detection.
• Coordinate with HVAC subcontractors in preparation of “For contraction” drawings.
• Review and check HVAC shop drawings prepared by subcontractors.
• Do actual site survey if needed as reference for design preparation.
• Prepares BOQ for HVAC related materials

• Manage the current stock status in all warehouse.
• Check the quantity and receive the materials from the suppliers
• Monitor records of all the “In and Out” materials and support documents.
• Key-in data in the system, reconcile the figures with the support documents, and prepare reports as required
• Ensure the materials are stored well and warehouse looks clean and tidy
• Supervise and develop all Warehouse Assistant
• To perform others related job assigned by Inventory Manager

• Control and check all the incoming production’s materials.
• Coordinate production daily use materials.
• Supervise and arranging container unloading.
• Oral / document interpretation in factory.
• Handle materials issuing and documentation.
• Handle factory housekeeping and material organization.
• Other tasks assigned by his/her manager.

• Manage information technology and computer systems
• Plan, organize, control and evaluate IT and electronic data operations
• Manage IT staff by recruiting, training and coaching employees, communicating job expectations and appraising their performance
• Design, develop, implement and coordinate systems, policies and procedures
• Ensure security of data, network access and backup systems
• Act in alignment with user needs and system functionality to contribute to organizational policy
• Audit systems and assess their outcomes
• Handle annual budget and ensure cost effectiveness
• Provides phone, live chat, or in-person support, depending on the organization's scope

• Focus on interior design from concept stage until construction details.
• Prepare for all Interior Design Presentation to owners under supervision of Senior Architect.
• Propose 3D concept model, rendering and material moodboard.
• Propose design materials and determines appropriateness for application to projects.
• Prepare shop drawings with attention to specification and coordinating dimensions and drawing references all in compliance to CAD protocol.
• Prepare Material & Specification lists following design intents.
• Handle Material Samples and ID documentaries.
• Assist Senior Architect in coordinating with clients to gather facts, defines design and space planning problems, conceptualize possible solutions and secure approvals of proposals.
• Coordinate with internal and external department team members to ensure no misinformation from design intent till construction.
• Work under supervision & reports directly to Senior Architect.

o Bachelor Degree of Mechanical Engineering
o One year experience or fresh graduate.
o Willing to learn and highly motivated
o Knowledgeable for MS Office and autocad
o Excellent communication and interpersonal skill
o Knowledgeable to develop reports
o English
o Key Competencies:
o Be honest, confidential, patient and friendly.
o Flexible and be able to handle complex and changing environment.

• Implements action plan as directed by the Customer Service Manager.
• Procures new and repeat business for the company by monitoring contact with assigned markets.
• Oversees the maintenance and upkeep of the Sales database.
• Prepare all contract as requested by Customer Service Manager for the final approval.
• Conducts Familiarization and Inspection for and in behalf of the company.
• Conducts market research and reports.
• Coordinates sales efforts and requirements with other departments to prompt and effective delivery of commitments to clients.
• Summits weekly and monthly reports and summary of sales’ activity to ensure targets and sales objectives are being met.
• Meet with guests visiting all project under company for inspection, familiarization as well as for VIP status stays.
• Establishes and continuously updates mailing lists.
• Organizes and attends major sales related functions with the company.
• Other responsibilities as may be further assigned by management.

• Quality control works in the factory, both materials and production.
• Documentation of materials and procedures undertaken.
• Other tasks assigned by his/her supervisor.