- Product Research and Development:

a. To understand the local construction methodology, trends, technologies, products and system through regular site surveys.
b. Propose the new products within the Group product range based on the construction methodology surveys.
c. To assist group technical team in HQ by providing local requirement, practices and specifications for the new product development.
d. To understand the local government authority’s requirements /process flow on new construction development.
e. To understand the local code of practice, standard regulations for the products and system.
f. Perform other work-related duties as deemed necessary by the Group Technical Manager.

- Product Training and Knowledge Enhancement:

a. Ensure all sales executives/Engineers and procurement officer well equipped with technical knowledge of their product ranges through the product knowledge enhancement training.
b. Responsible for development and update of training materials information, documents and training modules.
c. Responsible to Conduct class room training for Sales and procurement department
d. Responsible for the continuous improvement of training courses/modules based the feedback from training participants.

- Product Demand Analysis :

a. To provide the forecasting of the product ranges in the whole market though the technical studies.
b. To create a model project based on project info and to find out the product demand in upcoming year for all type of projects.
c. Do continuous improvements on analysing method by adding data to get the more accurate values

- Product Engineering and Quality Assurance & Quality Control (QA&QC):

a. Responsible for Preparation, revision and maintenance of technical documents, including product drawings, method of statements, test reports and review documents for revisions.
b. To ensure the products and system accordance to authority/ statutory board requirements.
c. Maintain certification and compliance of the existing products
d. To ensure products and quality meet customer expectations.
e. Ensure that all the products are compliance with the KUS Quality management guidelines and policies
f. Responsible for conducting Incoming Quality Check (IQC)
- Responsible for raising Non-Conformity Report (NCR)
- Generating/revising the quality related documents, including QIS and QQIS for the related products and systems
- Responsible for Other QA&QC related activities
- Responsible to do competitor sample comparison analysis.

- Technical Department Operation :
a. Ensure that all the operations in the department are inbound with the pertinent guidelines and policies of company
b. Writing and revising of the technical operational policies and procedures.
c. To ensure the all enquiries/complaints from the sales executives/procurement officers or customers addressed on time.
d. Responsible to provide product/system technical presentation to the customers in case of necessity
e. To develop the calculation sheets, templates, formula for improving the productivity.

-Design, Shop drawing and as built Chillers system and VRF system
-Check site during implement work to make sure the system design
-Inspection documents report
-Coordinate site work with subcontractor and follow site site progress
-Pick up equipment and material for order
-Testing and commissioning chillers and VRF system
-Report Testing and commissioning Chillers system and VRF system
-Report material submission document
-Handle costing work with suppliers
-Follow site site progress and ensure that the installation work allow schedule
-Testing and commissioning
-Perform inspection task & report
-Follow site progress work with Owner ,Main-contractor
-Other tasks assign by Manager

-Assist the works in Construction Department
-Communicate with other construction companies, suppliers and tenants
-Control fitting out work to be done
-Manage and control the documents in Construction Department
-Other duties assigned by manager

• To prepare and design drawing to submit to Site Supervisor/ Design Engineer
• To issue the preliminary drawing.
• To issue the revised drawing as needed from site or customer.
• To analyze/ interpret the drawing from the architecture into the scope of the contracting work.
• To prepare submitter Catalogs before and after bidding stage and while project execution.
final selection for equipment during project execution
• To prepare construction document to be forwarded to site including bill of quantity of equipment, construction drawing and technical
specifications.
• Other task assign by Manager

•Maintaining mechanical, electrical and plumbing facilities and equipment in compliance with requirements and specifications,
•Maintaining the mechanical, electrical, plumbing and fire protection specifications,
•Planning procedures for construction on the basis of start and completion times and staffing requirements for each phase of construction,
•Managing on-site construction activities from pre-start-up to completion, schedule work, including subcontractors,
•Preparing BOQ and maintaining schedule,
•Organizing and coordinating various phases of construction,
•Inspecting construction site and controlling construction work,
•Preparing construction schedule and follow up closely with work progress at site,
•Supervising daily activities and reporting,
•Other duties as assigned by Director.

- To do ground surveying by Total Station tool or D-GPS tool
- To do topographic update map and calculate volume
- To work follow road cut and quarry design to relation with planning.
- Able to used computation software as Auto CAD, and some surveying software, etc.
- Able to operate the Total Station machine, Mapping, Leveling machine.
- Able to set bend mark, line marking, and coordination boundary point.
- Make cross section, mapping, and drawing.
- Cooperate daily on the contractor/sub-contractor’s work.
- Ensure the correct location of building/part of building.
- To provide on-going and continuous contractual advice during construction to ensure that all parties strictly adhere to the corrected Works
- Daily Site Inspection and survey report
- Others task assign by Manager

None

- To do ground surveying by Total Station tool or D-GPS tool
- To do topographic update map and calculate volume
- To work follow road cut and quarry design to relation with planning.
- Able to used computation software as Auto CAD, and some surveying software, etc.
- Able to operate the Total Station machine, Mapping, Leveling machine.
- Able to set bend mark, line marking, and coordination boundary point.
- Make cross section, mapping, and drawing.
- Cooperate daily on the contractor/sub-contractor’s work.
- Ensure the correct location of building/part of building.
- To provide on-going and continuous contractual advice during construction to ensure that all parties strictly adhere to the corrected Works
- Daily Site Inspection and survey report
- Others task assign by Manager

•Maintaining mechanical, electrical and plumbing facilities and equipment in compliance with requirements and specifications,
•Maintaining the mechanical, electrical, plumbing and fire protection specifications,
•Planning procedures for construction on the basis of start and completion times and staffing requirements for each phase of construction,
•Managing on-site construction activities from pre-start-up to completion, schedule work, including subcontractors,
•Preparing BOQ and maintaining schedule,
•Organizing and coordinating various phases of construction,
•Inspecting construction site and controlling construction work,
•Preparing construction schedule and follow up closely with work progress at site,
•Supervising daily activities and reporting,
•Other duties as assigned by Director.

- Support air-condition equipment / machine troubleshoot & repairs (VRF)
- Implement electrical projects
- Carry out preventative maintenance for machine electrical systems (VRF)
- Carry out electrical installation for new machines set up or machine shifting
- Maintain inventory control for electrical spare parts
- Plan & execute electrical preventative maintenance